DIG Polyethylene Drip Tubing
DIG’s premium quality 1/2″ (.600 ID X .700 OD) Polyethylene drip tubing is available in lengths of 50′, 100′, 200′, 500′ and 1000′. The polyethylene drip tubing, commonly referred to as drip irrigation tubing, blank tubing, distribution tubing. PE tubing or drip hose, is used as the primary drip irrigation installation supply line, into which micro tubing, drip emitters, drip line or micro sprinklers are attached to deliver water to the plant areas. DIG’s durable drip irrigation tubing is made with low-density polyethylene resin material with a minimum of 2%+ Carbon Black for extra resistance to the damaging effects of ultraviolet rays. DIG poly drip tubing exhibits a combination of outstanding environmental stress-cracking resistance and burst strength to meet every demand of drip irrigation system installations above or below grade.
Features
- Available in 2′, 50′, 100′, 200′, 500′, and 1000′
- Contains a minimum of 2% concentrated carbon black resin antioxidant to protect the poly drip tubing from thermal degradation
- The poly drip tubing made with premium low density polyethylene resin exhibits a combination of outstanding environmental stress-cracking resistance and burst strength
- Use with our wide range of 1/2″ compression fittings with .700 OD
- The poly drip tubing can meet any demand for above and below grade micro irrigation systems for gardening, landscape and agricultural installations
- Can be used with other manufacturers’ brands of the same size of outside diameter tubing
- Available in black color
- DIG poly drip tubing and micro tubing are made in the USA
Technical
| MODEL | DESCRIPTION | IMAGE |
|---|---|---|
| B35 | 50 ft. 1/2 in. Poly Tubing |
 |
Specifications
- Operating pressure: up to 60 PSI
- Bending radius: 10"
- Color: black
- Size: 1/2" .600 ID x .700 OD (.50 wall thickness)
- Material: low-density polyethylene with a minimum of 2% carbon black
